48V Ultrasonic Cleaning Transducer , 230W Ultrasonic Atomizing Transducer 253*91*70 mm

Ultrasonic Humidifier Transducer and PCB generator

The ultrasonic nebulizer uses high frequency oscillations of electrons (oscillating frequency of 1.7MHz or 2.4MHz, exceeding the human hearing range, the electronic oscillation is no harm to human beings and animals). Through high frequency resonance of the ceramic atomizer, the molecular structure of liquid water is dispersed to produce natural flowing water mist, and then the mist is blown from the bottom to the bottom through a small fan. The outlet makes the air moist and accompanied by rich negative oxygen ions, which can refresh the air, improve health and create a comfortable environment.
1) no fouling, no cleaning: avoid the traditional products in regular cleaning of the scale, because of improper operation and damage the protective layer and thus lead to the risk of product life shortening.
2) acid and alkali corrosion, avoiding the problem of life reduction caused by the use of light corrosive materials such as perfume.
3) high temperature resistance, which avoids the risk of shortening the life of traditional products when they are used for a long time or with high temperature disinfection.
4) high consistency and reliability.
The atomization plate is widely used in various decorative plates, artificial hill resin water crafts, indoor humidifiers, cold fans, negative ion oxygen bar, aquarium, fish tank, pet and other products, so that people live in a comfortable environment.

The use of: For humidifying machine, fog equipment movement, or directly used as a humidifier (to be connected to 48V DC).

Use matters needing attention:

1. 1when the atomizer is working correctly, please don't put their hands on the above atomizer spray chamber, to prevent ultrasonic injury.
2. The atomizer must be in the water to work properly, before use, please the into the water and then connect the power, and to ensure that the fogging piece surface in the water, so as not to damage the atomizer.
3. when to stop using the atomizer before you disconnect the power supply, and then removed from the water atomizer.
4. use the atomizer, please use the output power is more than 250W, the output voltage is DC45 + 5V power supply.

5. when a plurality of atomizers set in the same container when in use, respectively is equipped with a separate power supply, not with a single power supply connection multiple atomizers use, and pay attention to the shell of the atomizer communicated each other, to thereby generate electrical corrosion.

6. Atomizer fog must use fan forced discharge, planar space and each nebulizer retained 350CM2, so as to avoid water temperature too high shorten the lifespan of the atomizer.

7. The atomizer is not suitable for the atomization of corrosive liquid, so as to avoid damage to the metal shell and atomizer atomizing sheet.

8. The installation process please don't damage the water level sensing switch, water level switch to avoid failures caused by uncontrolled atomizer.

   The water level switch is damaged should be stopped, otherwise there will be a piece of dry burning so as to further damage the atomizing atomizer. At this time need to be repaired by professional maintenance personnel to use.

Payment Methods:

1.Prepaid by PAYPAL

2.T/T

3.West Union

Why choose us:

1. Fast & Safety shipping: Shipment-By sea; By Plane (Transport time: within 7 days); By Couriers, TNT, DHL, FEDX, UPS, etc (Transport time:3-5 days)

2. 2,After sale service: Our staff warranty a fast and high efficiency after-sale service for our

   product sold to all over the world.

3. Our website provides 24-hour online customer services.

4. Supply the products according to required drawings, samples and performance.

Ultrasonic Humidifier Transducer and PCB generator

submersible ultrasonic transducer

ultrasonic power transducer

48V Ultrasonic Cleaning Transducer , 230W Ultrasonic Atomizing Transducer 253*91*70 mm Images